The width range of the Lockrack Adjustable XL Watersport Carrier # LR54FR that you referenced is 22-1/2 inches to 41-1/2 inches and usable inner height is 14-1/2 inches so this would easily carry your kayaks that are 33 inches wide and 6 inches tall. view full answer...
The Crossbar Adapters for Lockrack Watersport Carrier # 339LRADPTR has a measurement of 3-11/16 inches between the two mounting bolts as seen in the photo I attached. I also included a demonstration video for you to check out. view full answer...
The shortest inside length of the Lockrack Adjustable XL Watersport Carrier # LR54FR (with no adjustment) is 22-1/2 inches and the longest inside length of the Lockrack (fully extended) is 41-1/2 inches. I went ahead and attached a video that shows more additional dimensions. view full answer...
Yes, it will! The Lockrack Adjustable XL Watersport Carrier item # LR54FR has a 175 lbs capacity and can be adjusted to fit kayaks up to 48" wide. This carrier is also compatible with the Subaru factory crossbars and most aftermarket crossbars as well.
I have linked a review video below so you can see the functions of this carrier demonstrated. view full answer...
The Replacement Attachment Strap for Thule Roof Mounted Watersport Carriers # 853-5467 is a loop that when pulled tight measures 23-1/2 inches in length end to end. view full answer...
I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier # LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key. view full answer...
The Inno Locker Watersport Carrier w/ Crossbar Pads # INA446 that you referenced weighs a total of 13 lbs but actually does not have a weight capacity since the crossbars of your vehicle are what would be carrying the weight of the kayak. So basically this does not have a weight capacity and the number you saw happens to be the overall weight of the rack. view full answer...
Happy to help! The Lockrack Adjustable Watersport Carrier item # LR24VR only fits one kayak so you would need two of them. They measure anywhere from 23-3/4" wide to 43" wide depending on how wide your kayak is. You would need to take some measurements of your kayaks to see if you would be good with the standard 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2. Or needed to go with the longer 65" Vortex Aero Crossbars item # RRVA165B-2.
Here are the other parts you'll need to add... view full answer...
Fully retracted, the Lockrack Adjustable XL Watersport Carrier # LR54FR measures 17" high. So if you're looking for at least 3", you'll get that and plenty more which will ensure that the canoe does not hit your truck's cab.
Additionally, this carrier has a weight capacity of 175-lbs, an adjustable base width range of 28" to 46", and will carry up to 1 to 2 stand-up paddle boards, kayaks, or canoes.
I have also attached a review video as well as a diagram of # LR54FR for you to check out. view full answer...
I took a look at the Replacement Jawz2 V-Profile Crossbar Mounting Brackets for Malone Watersport Racks # MAL66TR and on Malones website, it appears that the # MAL66TR does have 4" center-of-the-hole to center-of-the-hole spacing.
The # MAL66TR mounting brackets are specifically designed to be used with Malone watersport carriers except the MPG121. They will work with crossbars up to 3.5" wide and 1.25" tall. view full answer...
The Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars, # THXADAPT12, contains 4 - M6 x 22mm T-bolts and nuts.
The Replacement Square Head Bolt for Thule Flat Top Ski and Snowboard Carrier, # 853208904, is a M6 x 13mm T-bolt so this is not the same bolt that is included with part # THXADAPT12. view full answer...
The various versions of the Thule Hullavator, including the Hullavator Pro # TH898, are not meant for use with canoes, just with kayaks. This version has a 75-lb weight capacity and accepts kayaks up to 36-inches wide. This load-assist carrier does not have the lifting capacity for the typically higher weight of a canoe.
A good high-value canoe carrier option from Lockrack is their Adjustable XL rooftop carrier # LR54FR. Although this does not offer the load assist it has a 175-lb weight... view full answer...
The capacity of the Erickson watersport carrier lift sling # EM02000 is 1,000 pounds. A 900 pound PWC would be fine as long as it isn't carrying over 100 pounds of stuff or water!
Please note this sling is designed for lifting only and not to support the PWC indefinitely. view full answer...
The Rightline Gear Kayak Carrier with Tie-Downs # RL100K10 don't have a weight rating so you are limited either by the weight rating of your bare roof, or the roof rack that these will be installed on (which is usually 165 lbs).
With that being said, if you plan on transporting your kayak very far or transporting it frequently then I do recommend using something a little more solid like the etrailer J-Style Kayak Carrier # e98878, Yakima BigCatch # Y04091, or the Lockrack Watersport Carrier... view full answer...
The Thule Compass Kayak and SUP Carrier # TH890000 is a great fit for your 2020 Honda Fit. It has a wide mouth to make it easier for loading kayaks. It also has nice adjustability like J-style for one kayak or post-style for two kayaks. I attached a screenshot where Thule gives instructions for installing it on your Thule Wingbar EVO crossbars. You need to use the 80mm bolts included with this carrier to install it onto your bars.
For your older kayak carrier like the Thule Hull-A-Port... view full answer...
On the Replacement Metal Bracket, # 853-5513, the center to center distance between the bolt holes is 3-15/16 inches. It replaces 1 metal bracket for Thule roof-mounted watersport carriers or Wheel-On bike-wheel carrier.
For the (discontinued) Rubber Gasket 14825, the center to center distance between the two holes is 3-9/16 inches. The holes are 5/16 inches in diameter. It replaces 1 missing or damaged rubber gasket on Thule Excursion ES, Frontier ES or Mountaineer ES roof-mounted cargo... view full answer...
Thanks for the awesome detail in your question!
I pulled each part from our warehouse to provide you the measurements requested.
The Thule Xadapt12 kit # THXADAPT12 T-bolt head size is 3/4 inches, 7/8 inch long threaded portion and .23 inch diameter.
The replacement M8 T-bolt # 853-5715 T-bolt head size is 3/4 inches, 1-inch long threaded portion and .30 inch diameter.
The replacement T-bolt # 853208904 head size is 3/4 inches, 5/8 inch long threaded portion and .23 inch diameter.
I... view full answer...
To add a roof rack to your 2023 Ford F-250 crew cab, I recommend the following parts:
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK498
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2
Or the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 if you use a lift assist kayak carrier.... view full answer...
You're pretty on the money, the Load Stops for Rhino-Rack Vortex Aero Crossbars or Pioneer Platform Rack # RRRLH2 is 2.76" long, 1 1/2" wide and 5" tall.
As for use with canoes you aren't actually going to be able to use these to secure your canoe because they aren't going to offer enough support and stability, so I'd actually recommend using the Lockrack Adjustable XL Watersport Carrier - Canoe, Kayak, or 2 SUPs # LR54FR instead.
This carrier can be slid into the t-slots on your aero... view full answer...
Go To Results